GATE AR branch:ar PYQs & Answers — Page 31

Questions 301–310 of 730. Imported answers require independent review unless marked reviewed.

Match the architects in Group I with their key architectural ideas in Group II.

Group I: (P) Ludwig Mies van der Rohe; (Q) Kisho Kurokawa; (R) Richard Rogers; (S) Louis I. Kahn.

Group II: (1) Bowellism; (2) Skin-and-bones architecture; (3) Served and servant spaces; (4) Dymaxion; (5) Metabolism

Your answerChoose one option.

P-2, Q-5, R-1, S-3

P-4, Q-1, R-3, S-5

P-2, Q-1, R-5, S-3

P-4, Q-5, R-1, S-2

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Match the pump types in Group-I with their key components in Group-II.

Group-I: (P) Centrifugal pumps; (Q) Reciprocating pumps; (R) Rotary pumps; (S) Impulse pumps.

Group-II: (1) Piston rod; (2) Impeller; (3) Gear; (4) Eductor pipe; (5) Hydraulic ram

Your answerChoose one option.

P-2, Q-1, R-3, S-5

P-1, Q-2, R-5, S-3

P-2, Q-5, R-4, S-1

P-1, Q-2, R-3, S-4

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Match the geometric forms in Group I with the buildings in Group II.

Group I: (P) Hyperboloid; (Q) Geodesic Dome; (R) Diagrid structure; (S) Umbrella Structures.

Group II: (1) Petronas Twin Towers, Kuala Lumpur, by Cesar Pelli; (2) Palazzo del Lavoro, Turin, by Pier Luigi Nervi; (3) The Biomes at the Eden Project in Cornwall, UK, by Nicholas Grimshaw; (4) Hearst Tower, New York, by Norman Foster; (5) Cathedral of Brasilia, by Oscar Niemeyer

Your answerChoose one option.

P-5, Q-3, R-4, S-2

P-3, Q-5, R-2, S-4

P-5, Q-3, R-1, S-4

P-3, Q-1, R-4, S-2

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Match the instruments in Group I with the physical quantities they measure in Group II.

Group I: (P) Goniophotometer; (Q) Pyrheliometer; (R) Spectrophotometer; (S) Forward-Looking Infrared Camera.

Group II: (1) Electromagnetic Energy at Specific Wavelengths of Light; (2) Luminous Flux of Directed Light Sources; (3) Direct Solar Irradiance; (4) Temperature; (5) Global Solar Radiation

Your answerChoose one option.

P-5, Q-2, R-1, S-3

P-2, Q-3, R-1, S-4

P-2, Q-3, R-1, S-5

P-5, Q-1, R-2, S-4

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Match the terms in Group I with their associated items in Group II.

Group I	Group II
(P) Scotopic vision	(1) ability to see under low light condition using rod cells
(Q) Presbyopia	(2) vision in bright light using cone cells
(R) Emmetropia	(3) inability to focus on distant objects
(S) Photopic vision	(4) ideal distance vision
	(5) inability to focus on nearby objects

Your answerChoose one option.

P-1, Q-4, R-5, S-2

P-4, Q-3, R-1, S-2

P-1, Q-5, R-4, S-2

P-4, Q-2, R-1, S-5

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Choose the correct statement(s) from the following:

Your answerSelect all correct options. You can choose more than one.

Waste water from sinks, baths, etc. enters through the top inlet of a gully trap, while foul water from sweeping of rooms or courtyards enters from side inlet.

Anti-siphon traps have a reduced water-way at the inlet side, while the outlet being larger prevents the pipe from filling full and causing siphonic action.

Intercepting traps prevent foul gases from street sewer to enter into the house.

P, Q and S traps are classified according to their shape.

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A steel wire of 5.65 mm diameter and 50 m length is used for a hoisting crane. The wire is used to vertically lift a weight of 200 kg attached to its lower end. Assume the Young’s Modulus of Elasticity of Steel as 2 × 10^5 N/mm^2 and gravitational acceleration as 10 m/sec^2. The elongation of the steel wire (in mm) will be ____ [round off to two decimal places].

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A simply supported RCC beam of span 4 m is supporting a brick wall over its entire span. The brick wall is 250 mm thick and 2 m high. The RCC beam has a depth of 600 mm and width of 250 mm. The density of brick masonry and RCC can be assumed as 18 KN/m^3 and 25 KN/m^3 respectively. Considering the load of the wall and self-weight of the RCC beam, the maximum bending moment in the beam (in KN-m) will be ______ [round off to two decimal places].

Diagram for Architecture and Planning question 65

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Select the most appropriate scale to measure Attitude, Opinion and Perception.

Your answerChoose one option.

Likert scale

Ratio scale

Richter scale

Armstrong scale

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Jal Shakti Abhiyan initiated by the Ministry of Jal Shakti does NOT include _____.

Your answerChoose one option.

Water conservation and rain water harvesting

Renovation of traditional water bodies

Hydroelectric power generation

Intensive afforestation

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

GATE AR branch:ar PYQs

Question 58

Question 59

Question 60

Question 61

Question 62

Question 63

Question 64

Question 65

Question 66

Question 67