Questions 71–80 of 94. Imported answers require independent review unless marked reviewed.

Topic practice 94 questionsPage 8 of 10

Question 33

Open question
ARMCQ2 marksNeeds review
Match the following in Column - I with their suitable description in Column - II, and select the appropriate option.
Column - I
Column - II
P — Tolerance
1 — 100 mm
Q — Precast concrete rings for wells
2 — Non modular dimension
R — M
3 — Acceptable variation
S — Weather joints
4 — 3D- prefabricate

5 — Resilient sealants
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 39

Open question
ARMCQ2 marksNeeds review
Match the figures of vaults in Column - I with their corresponding types in Column - II and select the appropriate option.
Column - I | Column - II P.
Diagram for Architecture and Planning question 39

| 1. Ribbed Q.
Diagram for Architecture and Planning question 39 (figure 2)

| 2. Fan R.
Diagram for Architecture and Planning question 39 (figure 3)

| 3. Barrel S.
Diagram for Architecture and Planning question 39 (figure 4)

| 4. Groin | 5. Nubian
(A) P-3, Q-4, R-1, S-2 (B) P-3, Q-1, R-4, S-5 (C) P-2, Q-1, R-5, S-3 (D) P-2, Q-3, R-1, S-5
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 49

Open question
ARNAT2 marksNeeds review
A power shovel is having 1.8 m³ excavation output per batch of operation. The average cycle time of the batch operation is 45 seconds. The lost time per hour of the excavation activity is 10 minutes. Assume six working hours of operation per day. The amount of soil excavated by the power shovel per day is ________ m³ (rounded off to two decimal places).

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 51

Open question
ARNAT2 marksNeeds review
A simple supported beam AB has a clear span of 7 meter. The bending moment diagram (BMD) of the beam due to a single concentrated load is shown in the figure below.
Diagram for Architecture and Planning question 51

The magnitude of the concentrated load in kN is ________.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 55

Open question
ARNAT2 marksNeeds review
A simple truss is shown in the figure below. The truss is loaded with horizontal and vertical force 15 kN and 25 kN, respectively. The force in the member AB will be ________ kN.
Diagram for Architecture and Planning question 55


Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 3

Open question
ARMCQ1 markNeeds review
The compressive strength of M-25 concrete is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 5

Open question
ARMCQ1 markNeeds review
Collapse of the World Trade Center (WTC), New York, in 2001, was due to
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 6

Open question
ARMCQ1 markNeeds review
During the construction of tall buildings, the equipment used for hoisting building materials to the upper floors is a
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 21

Open question
ARMCQ1 markNeeds review
The unit of measurement of Damp Proof Course (DPC) in building construction is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 30

Open question
ARMCQ2 marksNeeds review
Match the elements in Group-I with the building components in Group-II
Group-I P King post Q Grade beam R Metal decking S Jamb
Group-II 1 Curtain glazing 2 Door 3 Plinth 4 Intermediate floor 5 Truss
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer