Architecture and Planning
GATE AR year:2019 PYQs
Build your understanding with focused practice from past exam papers.
Questions 61–65 of 65. Imported answers require independent review unless marked reviewed.
Question 51
Open questionARNAT2 marksNeeds review
A simple supported beam AB has a clear span of 7 meter. The bending moment diagram (BMD) of the beam due to a single concentrated load is shown in the figure below.
The magnitude of the concentrated load in kN is ________.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 52
Open questionARNAT2 marksNeeds review
For a symmetrical trapezoidal open drain in a landscape with grass and loose rock surface, the velocity of flow of water is ______ m/sec, (rounded off to two decimal places), given the following data.
Water edge width at the top = 750 mm
Water edge width at the bottom = 450 mm
Water depth = 600 mm
Manning’s coefficient of roughness = 0.05
Slope along the drain = 1 in 250
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 53
Open questionARNAT2 marksNeeds review
The stack pressure is created by 10 m height of stack and 15°C temperature difference. The motive force due to the stack pressure over a cross section area of 2.5 m² is ______ N.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 54
Open questionARNAT2 marksNeeds review
An industrial building contains 3000 kg of combustible materials, in dry state, distributed over three rooms of area 100 m², 500 m² and 300 m² each, in a proportion of 30%, 50% and 20% of the contents, respectively. Calorific value of the material is 4400 kCal/kg. The Total Fire Load of the rooms is equal to ______ kCal/m².
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 55
Open questionARNAT2 marksNeeds review
A simple truss is shown in the figure below. The truss is loaded with horizontal and vertical force 15 kN and 25 kN, respectively. The force in the member AB will be ________ kN.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer