Questions 61–70 of 650. Imported answers require independent review unless marked reviewed.

Topic practice 650 questionsPage 7 of 65

Question 61

Open question
BTNAT2 marksNeeds review
A microbe that follows Monod growth kinetics on a limiting substrate (maximum specific growth rate of 0.5 h

and Monod constant of 0.1 mg L

) is cultivated in a continuous reactor for microbial growth (chemostat with sterile feed). Given that the chemostat volume is 5 L and inlet concentration of limiting substrate is 10 g L

, the minimum inlet feed flow rate for chemostat washout is ______ L h

. (rounded off to one decimal place)

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 62

Open question
BTNAT2 marksNeeds review
It is desired to cultivate 150 mg (dry weight) microbial cells with an empirical formula of C

H

O

N. If the phosphorus requirement for the cells is 20% of the nitrogen requirement (on a weight basis), the minimum amount of phosphorus required to be added to the cultivation medium is _______ mg. (rounded off to one decimal place)

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 63

Open question
BTNAT2 marksNeeds review
In the process of generating a clonal mammalian cell line, a single cell was seeded in a well of a cell culture plate. After the first 48 hours, one of the progeny cells underwent apoptosis due to a new mutation. If the doubling time of the cells is 24 hours and no more cell death occurs, the total number of cells after a total of 7 days from seeding will be _____. (answer in integer)

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 64

Open question
BTNAT2 marksNeeds review
A disease-associated allele shows X-linked recessive inheritance. If the mother is a carrier of the disease, the father is genetically normal and the child born is a son, then the probability that he is born with the disease is _____. (rounded off to one decimal place)

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 65

Open question
BTNAT2 marksNeeds review
A packed bed bioreactor with length 1 m and inside diameter 10 cm has liquid flowing at an interstitial velocity of 1 cm s⁻¹. Given a volumetric flow rate of 0.025 L s⁻¹, the void fraction of the packed bed is _____. (rounded off to two decimal places)

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 1

Open question
GAMCQ1 markNeeds review
Is there any good show ______ television tonight? Select the most appropriate option to complete the above sentence.
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 2

Open question
GAMCQ1 markNeeds review
As the police officer was found guilty of embezzlement, he was ______ dismissed from the service in accordance with the Service Rules. Select the most appropriate option to complete the above sentence.
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 3

Open question
GAMCQ1 markNeeds review
The sum of the following infinite series is:

Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 4

Open question
GAMCQ1 markNeeds review
A thin wire is used to construct all the edges of a cube of 1 m side by bending, cutting and soldering the wire. If the wire is 12 m long, what is the minimum number of cuts required to construct the wire frame to form the cube?
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 5

Open question
GAMCQ1 markNeeds review
The figures I, II and III are parts of a sequence. Which one of the following options comes next in the sequence as IV?
I
Diagram for Biotechnology question 5

II
Diagram for Biotechnology question 5 (figure 2)

III
Diagram for Biotechnology question 5 (figure 3)

IV ?
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer