Civil Engineering
GATE CE topic:civil-engineering PYQs
Build your understanding with focused practice from past exam papers.
Questions 811–820 of 1300. Imported answers require independent review unless marked reviewed.
Question 6
Open questionCEMCQ1 markNeeds review
A reinforcing steel bar, partially embeded in concrete, is subjected to a tensile force P. The figure that appropriately represents the distribution of the magnitude of bond stress (represented as hatched region), along the embedded length of the bar, is
Your answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 6
Open questionCEMCQ1 markNeeds review
The state of stress represented by Mohr’s circle shown in the figure is
Your answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 7
Open questionCEMCQ1 markNeeds review
In a two-dimensional stress analysis, the state of stress at a point
is
The necessary and sufficient condition for existence of the state of pure shear at the point
, isYour answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 7
Open questionCEMCQ1 markNeeds review
A weightless cantilever beam of span
is loaded as shown in the figure. For the entire span of the beam, the material properties are identical and the cross section is rectangular with constant width.
From the flexure-critical perspective, the most economical longitudinal profile of the beam to carry the given loads among the options given below, is
Your answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 8
Open questionCEMCQ1 markNeeds review
During the process of hydration of cement, due to increase in Dicalcium Silicate (C
S) content in cement clinker, the heat of hydrationYour answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 8
Open questionCEMCQ1 markNeeds review
As per IS 456:2000, the pH value of water for concrete mix shall NOT be less than
Your answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 9
Open questionCEMCQ1 markNeeds review
The Los Angeles test for stone aggregates is used to examine
Your answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 9
Open questionCEMCQ1 markNeeds review
The traffic starts discharging from an approach at an intersection with the signal turning green. The constant headway considered from the fourth or fifth headway position is referred to as
Your answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 10
Open questionCEMCQ1 markNeeds review
Which one of the following statements is NOT correct?
Your answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 10
Open questionCEMCQ1 markNeeds review
Soil deposit formed due to transportation by wind is termed as
Your answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer