Questions 681–690 of 1300. Imported answers require independent review unless marked reviewed.

Topic practice 1300 questionsPage 69 of 130

Question 6

Open question
CEMCQ1 markNeeds review
The direct and indirect costs estimated by a contractor for bidding a project is ₹16000 and ₹2000 respectively. If the mark up applied is 10% of the bid price, the quoted price (in ₹) of the contractor is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 6

Open question
CEMCQ1 markNeeds review
Strain hardening of structural steel means
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 7

Open question
CEMCQ1 markNeeds review
In an Oedometer apparatus, a specimen of fully saturated clay has been consolidated under a vertical pressure of 50 kN/m² and is presently at equilibrium. The effective stress and pore water pressure immediately on increasing the vertical stress to 150 kN/m², respectively are
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 7

Open question
CEMCQ1 markNeeds review
A single story building model is shown in the figure. The rigid bar of mass ‘m’ is supported by three mass elastic columns whose ends are fixed against rotation. For each of the columns, the applied lateral force (P) and corresponding moment (M) are also shown in the figure. The lateral deflection (δ) of the bar is given by

, where L is the effective length of the column, E is the Young’s modulus of elasticity and I is the area moment of inertia of the column cross-section with respect to its neutral axis.
For the lateral deflection profile of the columns as shown in the figure, the natural frequency of the system for horizontal oscillation is
Diagram for Civil Engineering question 7

Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 8

Open question
CEMCQ1 markNeeds review
A partially-saturated soil sample has natural moisture content of 25% and bulk unit weight of 18.5 kN/m³. The specific gravity of soil solids is 2.65 and unit weight of water is 9.81 kN/m³. The unit weight of the soil sample on full saturation is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 8

Open question
CEMCQ1 markNeeds review
Seasoning of timber for use in construction is done essentially to
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 9

Open question
CEMCQ1 markNeeds review
If water is flowing at the same depth in most hydraulically efficient triangle and rectangular channel sections then the ratio of hydraulic radius of triangle section to that of rectangular section is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 9

Open question
CEMCQ1 markNeeds review
In case of bids in Two-Envelope System, the correct option is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 10

Open question
CEMCQ1 markNeeds review
‘Kinematic viscosity’ is dimensionally represented as
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 10

Open question
CEMCQ1 markNeeds review
The most appropriate triaxial test to assess the long-term stability of an excavated clay slope is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer