GATE EE format:nat PYQs & Answers — Page 9 — Exam Papers

Questions 81–90 of 256. Imported answers require independent review unless marked reviewed.

Topic practice 256 questionsPage 9 of 26

A signal

is sampled at 200 Hz and then passed through an ideal low pass filter having cut-off frequency of 100 Hz. The maximum frequency present in the filtered signal in Hz is ____________ (Round off to the nearest integer).

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A balanced delta connected load consisting of the series connection of one resistor (R = 15 Ω) and a capacitor (C = 212.21 μF) in each phase is connected to three-phase, 50 Hz, 415 V supply terminals through a line having an inductance of L = 31.83 mH per phase, as shown in the figure. Considering the change in the supply terminal voltage with loading to be negligible, the magnitude of the voltage across the terminals V_AB in Volts is ____________ (Round off to the nearest integer).

Diagram for Electrical Engineering question 64

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A quadratic function of two variables is given as

The magnitude of the maximum rate of change of the function at the point (1,1) is ________ (Round off to the nearest integer).

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A MOD 2 and a MOD 5 up-counter when cased together results in a MOD ______ counter. (in integer)

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

An inductor having a

-factor of 60 is connected in series with a capacitor having a

-factor of 240. The overall

-factor of the circuit is _________. (round off to nearest integer)

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

The network shown below has a resonant frequency of 150 kHz and a bandwidth of 600 Hz. The

-factor of the network is __________. (round off to nearest integer)

Diagram for Electrical Engineering question 28

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

The maximum clock frequency in MHz of a 4-stage ripple counter, utilizing flip-flops, with each flip-flop having a propagation delay of 20 ns, is ____________. (round off to one decimal place)

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

If only 5% of the supplied power to a cable reaches the output terminal, the power loss in the cable, in decibels, is _________. (round off to nearest integer)

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

In the circuit shown below, the switch

is closed at

. The magnitude of the steady state voltage, in volts, across the 6

resistor is ________. (round off to two decimal places)

Diagram for Electrical Engineering question 31

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A single-phase full-bridge diode rectifier feeds a resistive load of 50

from a 200 V, 50 Hz single phase AC supply. If the diodes are ideal, then the active power, in watts, drawn by the load is ____________. (round off to nearest integer).

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer