Questions 271–280 of 715. Imported answers require independent review unless marked reviewed.

Topic practice 715 questionsPage 28 of 72

Question 11

Open question
EEMCQ1 markNeeds review
The transfer function of a real system,

, is given as:

,
where

,

,

and

are positive constants. This system cannot operate as
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 12

Open question
EEMCQ1 markNeeds review
For an ideal MOSFET biased in saturation, the magnitude of the small signal current gain for a common drain amplifier is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 13

Open question
EEMCQ1 markNeeds review
The most common used relay, for the protection of an alternator against loss of excitation, is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 14

Open question
EEMCQ1 markNeeds review
The geometric mean radius of a conductor, having four equal strands with each strand of radius

, as shown in the figure below,
Diagram for Electrical Engineering question 14

is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 15

Open question
EEMCQ1 markNeeds review
The valid positive, negative and zero sequence impedances (in p.u.), respectively, for a 220 kV, fully transposed three-phase transmission line, from the given choices are
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 16

Open question
EEMCQ1 markNeeds review
The steady state output (

), of the circuit shown below, will
Diagram for Electrical Engineering question 16

Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 17

Open question
EEMCQ1 markNeeds review
The Bode magnitude plot of a first order stable system is constant with frequency. The asymptotic value of the high frequency phase, for the system, is −180°. This system has
Diagram for Electrical Engineering question 17

Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 18

Open question
EEMCQ1 markNeeds review
A balanced Wheatstone bridge

has the following arm resistances:

is an unknown resistance;

. The value of

and its accuracy is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 19

Open question
EEMCQ1 markNeeds review
The open loop transfer function of a unity gain negative feedback system is given by

. The range of

for which the system is stable, is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 20

Open question
EEMCQ1 markNeeds review
Consider a 3 x 3 matrix

whose

-th element,

. Then the matrix

will be
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer