GATE IN topic:ac-circuits PYQs & Answers

Attempt a question, record the concept and assumptions, then check the available answer. Rework mistakes after revising the relevant concepts. Topic tags can overlap; review the question context.

Questions 1–6 of 6. Imported answers require independent review unless marked reviewed.

Topic practice 6 questionsPage 1 of 1

The RLC filter shown below acts as a _______.

Diagram for Instrumentation Engineering question 16

Your answerChoose one option.

low pass filter

high pass filter

band pass filter

band stop filter

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

In a series

circuit shown in the figure, the current through the resistor lags the AC source voltage by 45°. Let

Ω and

Diagram for Instrumentation Engineering question 33

The frequency of the source is ____ Hz. (rounded off to the nearest integer)

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Three parallel admittances

, and

connected in parallel with a voltage source

, draw a total current

from the source. The currents flowing through each of these admittances are

, and

, respectively. Let

. The phase relation between

and

Your answerChoose one option.

leads

lags

leads

lags

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Consider an AC bridge shown in the figure with

, and a detector

. The source voltage is

. At the bridge balance condition, the frequency of the excitation source

is ________ kHz (rounded off to two decimal places).

Diagram for Instrumentation Engineering question 56

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A series RLC circuit resonates at 750 rad/s for inductance L = 20 mH and resistance R = 10

. The uncertainties in the measurement of L and R are 0.8 mH and 0.3

, respectively. The percentage uncertainty in the measurement of quality factor is ______% (rounded off to one decimal place).

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

For the circuit shown in the figure, the active power supplied by the source is ______ W (rounded off to one decimal place).

Diagram for Instrumentation Engineering question 65

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

GATE IN topic:ac-circuits PYQs

How to practice topic:ac-circuits

Question 16

Question 33

Question 25

Question 56

Question 62

Question 65