Instrumentation Engineering
GATE IN topic:process-control PYQs
Build your understanding with focused practice from past exam papers.
Questions 351–360 of 650. Imported answers require independent review unless marked reviewed.
Question 16
Open questionINNAT1 markNeeds review
A 300 V, 5 A, LPF wattmeter has a full scale of 300 W. The wattmeter can be used for loads supplied by 300 V ac mains with a maximum power factor of __________ (rounded off to one decimal place).
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 17
Open questionINNAT1 markNeeds review
A 10-bit ADC has a full-scale of 10.230 V, when the digital output is (11 1111 1111)₂. The quantization error of the ADC in millivolt is _________.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 18
Open questionINNAT1 markNeeds review
A strain gage having nominal resistance of 100
has a gage factor of 2.5. If the strain applied to the gage is 100
m/m, its resistance in ohm will change to __________ (rounded off to two decimal places).Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 19
Open questionINNAT1 markNeeds review
Given: Density of mercury is 13,600 kg/m³ and acceleration due to gravity is 9.81 m/s². Atmospheric pressure is 101 kPa. In a mercury U-tube manometer, the difference between the heights of the liquid in the U tube is 1 cm. The differential pressure being measured in pascal is ______ (rounded off to the nearest integer).
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 20
Open questionINNAT1 markNeeds review
A piezoresistive pressure sensor has a sensitivity of 1 (mV/V)/kPa. The sensor is excited with a dc supply of 10 V and the output is read using a 3 ½ digit 200 mV full-scale digital multimeter. The resolution of the measurement set-up, in pascal is ___.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 21
Open questionINNAT1 markNeeds review
An amplitude modulation (AM) scheme uses tone modulation, with modulation index of 0.6. The power efficiency of the AM scheme is ____ % (rounded off to one decimal place).
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 22
Open questionINNAT1 markNeeds review
When the movable arm of a Michelson interferometer in vacuum (
) is moved by 325
m, the number of fringe crossings is 1000. The wavelength of the laser used in nanometers is _____.Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 23
Open questionINNAT1 markNeeds review
Consider the function
. The minimum value of the function in the interval [5, 10] is ___.Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 24
Open questionINNAT1 markNeeds review
Let
be defined in the complex plane. The integral
over the contour of a circle
with center at the origin and unit radius is ____.Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 25
Open questionINNAT1 markNeeds review
The determinant of the matrix M shown below is ____.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer