Questions 551–560 of 650. Imported answers require independent review unless marked reviewed.

Topic practice 650 questionsPage 56 of 65

Question 21

Open question
INNAT1 markNeeds review
A 300 V, 5A, 0.2 pf low power factor wattmeter is used to measure the power consumed by a load. The wattmeter scale has 150 divisions and the pointer is on the 100ᵗʰ division. The power consumed by the load (in Watts) is ____ .

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 22

Open question
INNAT1 markNeeds review
As shown in the figure, temperature

is measured using a K type thermocouple. It has a sensitivity of 40

V/°C. The gain (G) of the ideal instrumentation amplifier is 25. If the output

is 96 mV, then the value of

(in °C) is ___.
Diagram for Instrumentation Engineering question 22


Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 23

Open question
INMCQ1 markNeeds review
A piezoelectric pressure sensor has a bandpass characteristic with cut-off frequencies of 0.1 Hz and 1 MHz, and a sensitivity of 100 mV/kPa. The sensor is subjected to a static constant pressure of 100 kPa. Its steady-state output will be
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 24

Open question
INNAT1 markNeeds review
An amplitude modulated signal is shown in the figure. The modulation index is (up to one decimal place) ______.
Diagram for Instrumentation Engineering question 24


Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 25

Open question
INNAT1 markNeeds review
An optical pulse containing

photons is incident on a photodiode and

electron-hole pairs are created. The maximum possible quantum efficiency (in %) of the photodiode is ______.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 26

Open question
INMCQ2 marksNeeds review
Given

, the value of the line integral

along the straight line

from

to

is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 27

Open question
INMCQ2 marksNeeds review
Two bags

and

have equal number of balls. Bag

has 20% red balls and 80% green balls. Bag

has 30% red balls, 60% green balls and 10% yellow balls. Contents of bags

and

are mixed thoroughly and a ball is randomly picked from the mixture. What is the chance that the ball picked is red?
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 28

Open question
INMCQ2 marksNeeds review
Consider the following system of linear equations:

Here

and

are the unknowns and

is a real constant. The value of

for which there are infinite number of solutions is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 29

Open question
INMCQ2 marksNeeds review
Consider the following equations


where p and q are constants.

that satisfies the above equations is
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 30

Open question
INNAT2 marksNeeds review
In the given circuit, superposition is applied. When

is set to 0 V, the current

is −6 A. When

is set to 0 V, the current

is +6 A. Current

(in A) when both sources are applied will be (up to two decimal places) ____.
Diagram for Instrumentation Engineering question 30


Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer