Mechanical Engineering
GATE ME purpose:exam-prep PYQs
Build your understanding with focused practice from past exam papers.
Questions 701–710 of 1040. Imported answers require independent review unless marked reviewed.
Question 16
Open questionMEMCQ1 markNeeds review
The position vector
of point P (20, 10) is rotated anti-clockwise in X-Y plane by an angle
such that point P occupies position Q, as shown in the figure. The coordinates
of Q are 
Your answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 16
Open questionMEMCQ1 markNeeds review
The cold forming process in which a hardened tool is pressed against a workpiece (when there is relative motion between the tool and the workpiece) to produce a roughened surface with a regular pattern is
Your answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 17
Open questionMEMCQ1 markNeeds review
The table presents the demand of a product. By simple three-months moving average method, the demand-forecast of the product for the month of September is
Month | Demand |
|---|---|
January | 450 |
February | 440 |
March | 460 |
April | 510 |
May | 520 |
June | 495 |
July | 475 |
August | 560 |
Your answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 17
Open questionMEMCQ1 markNeeds review
The most common limit gage used for inspecting the hole diameter is
Your answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 18
Open questionMENAT1 markNeeds review
Evaluation of
using a 2-equal-segment trapezoidal rule gives a value of ________Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 18
Open questionMEMCQ1 markNeeds review
The transformation matrix for mirroring a point in
plane about the line
is given byYour answerChoose one option.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 19
Open questionMENAT1 markNeeds review
A block of mass 10 kg rests on a horizontal floor. The acceleration due to gravity is 9.81 m/s². The coefficient of static friction between the floor and the block is 0.2. A horizontal force of 10 N is applied on the block as shown in the figure. The magnitude of force of friction (in N) on the block is ______
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 19
Open questionMENAT1 markNeeds review
If
is the mean of data 3,
, 2 and 4, then the mode is ______Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 20
Open questionMENAT1 markNeeds review
A cylindrical rod of diameter 10 mm and length 1.0 m is fixed at one end. The other end is twisted by an angle of 10° by applying a torque. If the maximum shear strain in the rod is
, then p is equal to ______ (round off to two decimal places).Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 20
Open questionMENAT1 markNeeds review
The figure shows an idealized plane truss. If a horizontal force of 300 N is applied at point A, then the magnitude of the force produced in member CD is ______ N.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer