GATE MT topic:materials-engineering PYQs & Answers — Page 20

Questions 191–200 of 650. Imported answers require independent review unless marked reviewed.

of A-B alloy containing 20 wt.% B is held at temperature

. The weight of B dissolved in

at that temperature is ________

. (Round off to the nearest integer).

Diagram for Metallurgical Engineering question 61

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A mild steel pipeline is connected to zinc for cathodic protection at a current density of 10

. The quantity of zinc required per square meter of the pipeline per year is ________

. (Round off to the nearest integer).

Given: Atomic weight of Zn is 65

Faraday’s constant

(of electrons)

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A large rectangular component is undergoing fully-reversed cyclic loading, and the component is known to grow the dominant fatigue crack from the outer surface. If the stress amplitude (

) is 100

and the critical stress intensity factor

of the material is 50

then the crack length at which the component will fail catastrophically is _____

. (Round off to one decimal place)

Given: The geometric factor

for this loading condition is 1.12.

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

In casting, for a simple vertical gating system with a gate of cross-sectional area 2

and sprue height of 10

, the filling time for a mould of dimensions 40

, is ________

. (Round off to one decimal place)

Given: Acceleration due to gravity

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

During arc welding, the actual heat input is 200

and the current and voltage are 200 A and 20 V, respectively. For a weld cross-sectional area of 2

and heat transfer efficiency of 0.9, the velocity of welding is ________

. (Round off to the nearest integer).

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

“You are delaying the completion of the task. Send ______ contributions at the earliest.”

Your answerChoose one option.

you are

your

you’re

yore

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

References : ______ :: Guidelines : Implement (By word meaning)

Your answerChoose one option.

Sight

Site

Cite

Plagiarise

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

In the given figure, PQRS is a parallelogram with PS = 7 cm, PT = 4 cm and PV = 5 cm. What is the length of RS in cm? (The diagram is representative.)

Diagram for Metallurgical Engineering question 3

Your answerChoose one option.

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

In 2022, June Huh was awarded the Fields medal, which is the highest prize in Mathematics.

When he was younger, he was also a poet. He did not win any medals in the International Mathematics Olympiad. He dropped out of college.

Based only on the above information, which one of the following statements can be logically inferred with certainty?

Your answerChoose one option.

Every Fields medalist has won a medal in International Mathematics Olympiad.

Everyone who has dropped out of college has won the Fields medal.

All Fields medalists are part-time poets.

Some Fields medalists have dropped out of college.

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A line of symmetry is defined as a line that divides a figure into two parts in a way such that each part is a mirror image of the other part about that line.

The given figure consists of 16 unit squares arranged as shown. In addition to the three black squares, what is the minimum number of squares that must be colored black, such that both PQ and MN form lines of symmetry? (The figure is representative)

Diagram for Metallurgical Engineering question 5

Your answerChoose one option.

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

GATE MT topic:materials-engineering PYQs

Question 61

Question 62

Question 63

Question 64

Question 65

Question 1

Question 2

Question 3

Question 4

Question 5