Production and Industrial Engineering
GATE PI concept:laminar PYQs
Build your understanding with focused practice from past exam papers.
How to practice concept:laminar
Attempt a question, record the concept and assumptions, then check the available answer. Rework mistakes after revising the relevant concepts. Topic tags can overlap; review the question context.
Questions 1–3 of 3. Imported answers require independent review unless marked reviewed.
Question 64
Open questionPINAT2 marksNeeds review
Water flows through a smooth circular pipe of diameter 10 cm and length 10 m. The pressure drop across the length of the pipe is 0.2 Pa. Kinematic viscosity and density of water are 1×10⁻⁶ m²/s and 1000 kg/m³, respectively. Assuming laminar and fully developed flow throughout the pipe, the velocity of water (in m/s) at the center of the pipe is __________. (Rounded off to one decimal place)
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 48
Open questionPINAT2 marksNeeds review
An irrigation pump is used to draw water from a pond. One end of a 5.05 cm diameter hose pipe is connected to the outlet of the pump at 1.02 m below the surface level, and just after the pump, the static gauge pressure and flow rate of the water are 50 kPa and 8 kg/s, respectively. The pumped water is discharged at the ground level through a nozzle. Assume that the flow through the hose pipe and nozzle is steady and laminar, and friction and viscous losses are negligible. The density of water is 1000 kg/m
and the acceleration due to gravity is 9.81 m/s
. If the static pressure at the nozzle exit of the nozzle jet reduces to atmospheric pressure then the nozzle diameter (in cm) of the nozzle is __________. (Rounded off to 2 decimal places)Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 27
Open questionPINAT1 markNeeds review
Water (kinematic viscosity
) is flowing through a circular horizontal pipe of diameter 8 mm. If the flow is laminar and fully developed with a maximum axial velocity of 0.5 m/s, the Reynolds number is____________. [round off to nearest integer]Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer