GATE PI topic:industrial-engineering PYQs & Answers — Page 58

Questions 571–580 of 650. Imported answers require independent review unless marked reviewed.

Topic practice 650 questionsPage 58 of 65

Length, width and thickness of a plate are 400 mm, 400 mm and 30 mm, respectively. For the material of the plate, Young’s modulus of elasticity is 70 GPa, yield stress is 80 MPa and Poisson’s ratio is 0.3. When the plate is subjected to a longitudinal tensile stress of 70 MPa, the increase in the volume (in mm

) of the plate is _____

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

In a V-thread, a wire is fitted such that it makes contact with the flank of the thread on the pitch line as shown in the figure. If the pitch p of the thread is 3 mm and the included angle is 60°, the diameter (in mm, up to one decimal place) of the wire is _____

Diagram for Production and Industrial Engineering question 42

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A project consists of three activities P, Q and R. The durations of activities follow Beta distribution. The predecessors and durations of activities are as per the following table: | Activity | Predecessors | Optimistic time (month) | Most likely time (month) | Pessimistic time (month) | P | — | 2 | 3 | 10 | Q | P | 3 | 5 | 13 | R | Q | 3 | 4 | 5 | The expected project completion time (in month) is _____

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A company has two manufacturing plants (C

and C

) and two distribution centres (D

and D

). The capacities of C

and C

are 100 and 200 units, respectively. The demand for D

and D

are 190 and 110 units, respectively. The costs per unit (in Rs.) of transportation at different routes are as per the following matrix: | | D

| D

| C

| 22 | 21 | C

| 20 | 27 | The minimum total cost (in Rs.) of transportation is _____

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

The annual demand of an item is 19845 units and the production rate is 100 units per day. The per-unit production cost (excluding setup cost) is Rs. 50, the per unit holding cost is Rs. 10 per year and setup cost is Rs. 520 per setup. To minimize the total annual cost, the optimum quantity to be produced per setup is _____

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A production line operates 7 hours a day in a 5-day week. The processing times for various job elements are as follows: | Job element: p, q, r, s, t | Processing time (s): 5, 10, 12, 3, 15 | If the line is designed for an output of 840 units per week, the theoretical minimum number of work stations required is _____

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

In a work sampling study of a worker, the information available are as follows: total time of study: 30 hour, number of items produced: 320, total number of observations: 100, number of observations when worker is found working: 80 and average performance rating: 105%. Company policy is to give allowance of 10% of total time on the job. The standard time (in minute per item, up to one decimal place) for manufacturing the item is _____

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

The breakeven point of a manufacturing company is 5000 units. The fixed cost is Rs. 20000 and the variable cost per unit is Rs. 20. The selling price per unit (in Rs.) of the product at this breakeven point is _____

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A 10 mm thick plate is rolled to 7 mm thickness in a rolling mill using 1000 mm diameter rigid rolls. The neutral point is located at an angle of 0.3 times the bite angle from the exit. The thickness (in mm, up to two decimal places) of the plate at the neutral point is _____

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

A cylindrical workpiece is turned at a feed of 0.1 mm/rev with a perfectly sharp tool. In ASA system, the side and end cutting edge angles are 15° and 5°, respectively, as shown in the figure. The peak-to-valley roughness (in

m, up to one decimal place) of the machined surface is _____

Diagram for Production and Industrial Engineering question 50

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

GATE PI topic:industrial-engineering PYQs

Question 41

Question 42

Question 43

Question 44

Question 45

Question 46

Question 47

Question 48

Question 49

Question 50