Architecture and Planning
2025 · Paper 1
Take it one question at a time. Try an answer, then check your understanding.
Complete GATE AR 2025 Paper 1 overview, original pages and practice · Timed previous-paper practice
Questions 61–63 of 81. Imported answers require review unless explicitly marked reviewed.
Question 61
Open questionAR-B1MSQ2 marksNeeds review
Which of the following tall building(s) is/are having bundled-tube structural system?
Your answerSelect all correct options. You can choose more than one.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 62
Open questionAR-B1NAT2 marksNeeds review
A simply supported beam is under a uniformly distributed load (UDL) along the full span. The mid-span deflection is measured as 24 mm. If the length and depth of the beam is doubled while keeping other parameters unchanged, the mid-span deflection is ____________ mm. (answer in integer)
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 63
Open questionAR-B1NAT2 marksNeeds review
A rectangular RCC beam section of 250 mm width and 400 mm effective depth is under a factored Shear Force of 120 kN. The design shear strength (τc) of concrete is 0.35 N/mm². Two-legged, 8 mm diameter stirrups are used for the shear reinforcement. Assuming the Yield Stress of Steel, fy = 415 N/mm², the design spacing (c/c) of the stirrups is ____________ mm. (rounded off to the nearest integer)
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer