Mechanical Engineering
2020 · Paper 1
Take it one question at a time. Try an answer, then check your understanding.
Complete GATE ME 2020 Paper 1 overview, original pages and practice · Timed previous-paper practice
Questions 49–51 of 65. Imported answers require review unless explicitly marked reviewed.
Question 39
Open questionMENAT2 marksNeeds review
A rectangular steel bar of length 500 mm, width 100 mm, and thickness 15 mm is cantilevered to a 200 mm steel channel using 4 bolts, as shown.
For an external load of 10 kN applied at the tip of the steel bar, the resultant shear load on the bolt at B, is ______ kN (round off to one decimal place).
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 40
Open questionMENAT2 marksNeeds review
The barrier shown between two water tanks of unit width (1 m) into the plane of the screen is modeled as a cantilever.
Taking the density of water as 1000 kg/m³, and the acceleration due to gravity as 10 m/s², the maximum absolute bending moment developed in the cantilever is ______ kN·m (round off to the nearest integer).
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 41
Open questionMENAT2 marksNeeds review
The magnitude of reaction force at joint C of the hinge-beam shown in the figure is ____ kN (round off to 2 decimal places).
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer