Complete GATE XE 2017 Paper 1 overview, original pages and practice · Timed previous-paper practice

Questions 31–33 of 175. Imported answers require review unless explicitly marked reviewed.

Paper practice 175 questionsPage 11 of 59

Question 31

Open question
XE-BNAT2 marksNeeds review
Air flows over a smooth flat plate at a velocity of 4.39 m/s. The density of air is 1.031 kg/m³ and the kinematic viscosity is 1.34×10⁻⁵ m²/s. The plate length is 12.2 m in the direction of the flow. The boundary layer thickness (

) is given as

, where

is the distance from the leading edge and

is the Reynolds number. The boundary layer thickness (in meters, rounded off to the second decimal place) at 12.2 m from the leading edge will be ________

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 32

Open question
XE-BNAT2 marksNeeds review
A venturimeter of diameter 0.2 m at the entrance and 0.1 m at the throat is inclined upwards. The vertical elevation difference between the entrance and the throat is 0.5 m. The density of water is 1000 kg/m³ and the coefficient of velocity is 0.97. The differential U-tube manometer connected to the entrance and throat shows a pressure difference of 30 kN/m². Assume acceleration due to gravity as 9.81 m/s². The velocity of the water (in m/s, rounded off to the first decimal place) at the throat would be ________

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer

Question 33

Open question
XE-BMCQ2 marksNeeds review
A spherical bubble of radius

is rising upward with a constant velocity

, in quiescent water of dynamic viscosity

. The density of air and water are denoted by

and

, respectively, and

is acceleration due to gravity. The bubble motion is such that the Reynolds number,

. The density of air can be neglected in comparison to the water density (

). Which one of the following expressions is TRUE for the density of water?
Your answerChoose one option.

Log in to check the answer

You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer