Engineering Sciences
2020 · Paper 1
Take it one question at a time. Try an answer, then check your understanding.
Complete GATE XE 2020 Paper 1 overview, original pages and practice · Timed previous-paper practice
Questions 106–108 of 175. Imported answers require review unless explicitly marked reviewed.
Question 19
Open questionXE-ENAT2 marksNeeds review
Saturation pressure of water at 5 °C is 0.8725 kPa. If the latent heat of vaporization is 2489.1 kJ/kg and gas constant is 0.4615 kJ/kg.K, then the saturation pressure at 10 °C (in kPa) (rounded off to 2 decimal places) is ________.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 20
Open questionXE-ENAT2 marksNeeds review
The turbine inlet conditions of a Rankine cycle are 10 MPa and 500 °C, while the condenser pressure is 10 kPa. The enthalpy and entropy of saturated liquid at 10 kPa are 191.8 kJ/kg and 0.6492 kJ/kg.K, respectively, while the enthalpy and entropy of vaporization at 10 kPa are 2392.1 kJ/kg and 7.4996 kJ/kg.K, respectively. The enthalpy and entropy at the inlet to the turbine are 3375.1 kJ/kg and 6.995 kJ/kg.K, respectively. The condenser outlet has saturated liquid. Neglecting the pump work, the thermal efficiency (in %) of the cycle (rounded off to 1 decimal place) is ________.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 21
Open questionXE-ENAT2 marksNeeds review
The minimum and maximum temperatures of an air standard Brayton cycle are 300 K and 1100 K, respectively. The pressure ratio of this cycle is 6. The ratio of specific heats is 1.4 and the specific heats are constant. For this cycle, the ratio of network output to the turbine work (rounded off to 2 decimal places) is ________.
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer