Engineering Sciences
2024 · Paper 1
Take it one question at a time. Try an answer, then check your understanding.
Complete GATE XE 2024 Paper 1 overview, original pages and practice · Timed previous-paper practice
Questions 103–105 of 175. Imported answers require review unless explicitly marked reviewed.
Question 103
Open questionXE-ENAT2 marksNeeds review
Consider the following data from a Brayton cycle.
Enthalpy at inlet to turbine: 1400 kJ/kg
Enthalpy at exit of turbine: 880 kJ/kg
Enthalpy at exit of compressor: 600 kJ/kg
On adding a regenerator of effectiveness equal to 0.8, the absolute value of percentage change in heat addition is ________ (rounded off to the nearest integer).
Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 104
Open questionXE-ENAT2 marksNeeds review
An ideal gas undergoes a series of reversible steady state, steady flow processes between states 1, 2 and 3. Process 1→2 satisfies the relation
, where pressure, P is in kPa and specific volume, v is in m³/kg. Process 2→3 is isobaric. Given that
m³/kg,
m³/kg,
, the total work done per unit mass (in kJ/kg) in the series of processes 1→2→3 is ________ (rounded off to the nearest integer).Log in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answerQuestion 105
Open questionXE-ENAT2 marksNeeds review
Air (assumed as an ideal gas) with a mass flow rate of 2.5 kg/s enters a horizontal nozzle at 350 K, 350 kPa with a velocity of 3 m/s. The air exits the nozzle at a pressure of 101.5 kPa and temperature 305 K with a Mach number of
. Assuming steady state operation and constant properties given in the data, the ratio of inlet area to exit area required to satisfy the exit condition is ________ (rounded off to one decimal place).Use the following data:
,
kJ/kg.K,
kJ/kg.KLog in to check the answer
You can attempt this question now. Sign in to view the answer key, explanations and discussion.Log in to check answer