BEFORE YOU BEGIN

Start with the right foundations

Binary arithmetic, powers of two, rates and units.

3 key concepts1 worked example3 revision checks

Original introductory notes with source references. The example is a teaching exercise, rather than an official worked solution to a GATE question. Use the full syllabus to track coverage.

01 · UNDERSTAND

Key concepts

Use these ideas to reason through a question before choosing a formula or an answer.

Concept 1

Delay and bandwidth

Transmission delay for L bits on a link of R bits/s is L/R seconds. Propagation delay for distance d at speed v is d/v. They measure different effects. Queueing and processing may add further delay.

Concept 2

IPv4 subnetting

A /p IPv4 prefix leaves 32 − p host bits and contains 2^(32−p) addresses. The familiar usable-host count minus two applies to conventional broadcast subnets; /31 point-to-point links and /32 host routes need different treatment.

Concept 3

Reliable transport

TCP provides a byte stream, not preserved application message boundaries. Flow control protects the receiver; congestion control responds to network capacity. UDP itself does not provide retransmission or ordered delivery.

02 · WORK THROUGH IT

A worked teaching example

Attempt the problem first, then trace each step and compare your reasoning.

The problem

A 1,000-byte packet crosses a 2 Mbit/s link over 200 km at a propagation speed of 2 × 10^8 m/s. Ignore queueing and processing. Find transmission and propagation delay.

Step-by-step reasoning

  1. 1

    Convert packet length: 1,000 × 8 = 8,000 bits.

  2. 2

    Transmission = 8,000/(2 × 10^6) = 0.004 s.

  3. 3

    Distance = 200,000 m; propagation = 200,000/(2 × 10^8) = 0.001 s.

Check your result

Compare your calculation and assumptions.

Transmission is 4 ms and propagation is 1 ms; one-link total is 5 ms under these assumptions.

03 · SPOT THE TRAPS

Common mistakes

  • Substituting bytes into a bit/s rate.
  • Treating RTT as one-way propagation delay.
  • Using a minus-two host rule for every prefix.

04 · CHECK YOUR UNDERSTANDING

Revision checklist

  • Convert every quantity to consistent units.
  • Identify store-and-forward versus cut-through assumptions.
  • Label transmission, propagation and round-trip delay.

Explain each point without the notes, then check it with an unfamiliar question. Print or save these notes as a PDF for your revision session.

05 · APPLY IT

Put these ideas into practice

Attempt related previous year questions and record the reasoning behind any mistakes.

Computer Networks

72 archived questions

Plan your next revision session

Explore topic history or move to another note.

READ FURTHER

Study references

Use the original references for a fuller explanation and more worked problems.